Where to buy

TA-3 Adapter

TM

$8.00

USD
TA-3 Adapter
TA-3 Adapter - Image 2
TA-3 Adapter - Image 3
TA-3 Adapter - Image 4
TA-3 Adapter
TA-3 Adapter
TA-3 Adapter
TA-3 Adapter

One 5/8″-27F to European 3/8″-16M nickel-plated adapter.

Please note orders typically ship within 7-10 days. We are unable to accommodate rush requests at this time.

Related

  • Accessories, Stereo Bars and Arrays

    Decca Tree

    Microphone array positioner: 1M x 2M, 3 mic sliders

  • Accessories, Preamp Parts

    TRP2 Rack Shelf

    The TRP2 Rack Shelf allows you to mount two TRP2s in a single 1U space in any standard rack. Each TRP2 can be mounted to the shelf by a single phillips screw that connects through the rack shelf direct into the base of the TRP2. The entire assembly can then be mounted in a rack. …

  • Accessories, Connectors and Adapters

    Locking Ring

    The AEA locking rings are wide locking rings for 5/8″-27 thread mic adapters and stands in a nickel finish. These locking rings give you more flexibility when tightening mics and mic clips.

  • Accessories, Connectors and Adapters

    ADPT

      The ADPT allows you to take any standard pipe that is less than 5/8‚” end and mount a microphone to it. The ADPT is 5/8″ receiver to 1/2″ pipe thread adapter, 4.5″ long and 1.25″ diameter, in a black finish. Please note orders typically ship within 7-10 days. we are…

  • Accessories, KU5A Accessories

    KU5A Windscreen

    The KU5A Windscreen is a custom designed foam windscreen that slips over the¬†KU5A ribbon microphone,¬†allowing you to use¬†it up close on vocals without the need for an¬†unwieldy pop filter as well as¬†in outdoor settings protecting it from direct blasts of wind. It was modeled with a transparent sound so the tonality of…

  • Accessories

    R44 Case-SKB

    Black  SKB hard case with foam for AEA and RCA 44-style mics.