TRP2 Rack Shelf

The R44 Cloth Zipper Bag is the standard slip cover that comes with the purchase of an R44 and KU4. When storing your microphones on a stand, easily place the slipcover over your R44 and KU4 microphones and it will protect your ribbons from tramp iron and sudden and spontaneous blasts of wind.
The TRP2 Rack Shelf allows you to mount two TRP2s in a single 1U space in any standard rack. Each TRP2 can be mounted to the shelf by a single phillips screw that connects through the rack shelf direct into the base of the TRP2. The entire assembly can then be mounted in a rack. …

The Rack Ears allow you to easily mount your 1/2 rack TRP or compresor in any standard rack. The rack ears are attached with four phillips screws to unit. Please note orders typically ship within 7-10 days. we are unable to accommodate rush requests at this time*

The ADPT allows you to take any standard pipe that is less than 5/8‚” end and mount a microphone to it. The ADPT is 5/8″ receiver to 1/2″ pipe thread adapter, 4.5″ long and 1.25″ diameter, in a black finish. Please note orders typically ship within 7-10 days. we are…

The VS.5 is a 5/8″-27F to 5/8″-27M 1/2″ tall steel adapter. Adds extra 1/2″ mic height for mic arrays. Repairs US male mic stand threads. Please note orders typically ship within 7-10 days. We are unable to accommodate rush requests at this time.

Universal TRP2 power supply // bipolar 18VDC and 48VDC on a 5-pin XLR.

