Where to buy

Snaqbox™

TM

$299.00

USD

The AEA Snaqbox™ is a transparent, two-channel, 500-series chassis with separate dual linear regulators for each channel, ensuring complete power isolation between 500 units

Orange Scaled Snaqbox
Snaqbox™ - Image 2
Orange Scaled Snaqbox
Snaqbox™ - Image 4
Snaqbox™ - Image 5
Snaqbox™ - Image 6
Snaqbox™ - Image 7
Orange Scaled Snaqbox
Snaqbox™
Orange Scaled Snaqbox
Snaqbox™
Snaqbox™
Snaqbox™
Snaqbox™

Snaqbox™ Overview

  • 2-Slot 500 Series Chassis
  • Link/Cascade Switch
  • Compatible with all standard 500 Series modules
  • Universal External Switching Power Supply; Seamlessly Compatible With Both 120VAC and 230VAC
  • Durable Steel Chassis with Clear or Orange Acrylic Sideplate
  • Made in the USA
  • XLR I/O

Your Signal Chain — Now in Full View

The AEA Snaqbox™ is a transparent, two-channel, 500-series chassis with separate dual linear regulators for each channel, ensuring complete power isolation between 500 units. The unit is powered by an external switching power supply to keep switching noise away from the unit.

The acrylic sideplate of the unit comes in either clear or fluorescent orange. The chassis is made of steel and the bottom of the Snaqbox™ is affixed with durable rubber bumpers. All XLRs on the Snaqbox™ are Neutrik brand.

The Snaqbox™ features a LINK/CASCADE switch. When engaged, the audio output of Channel 1 is internally routed to the input of Channel 2. The link switch disconnects the connection from the XLR input of Channel 2, but does not disconnect the output of Channel 1 (thus allowing dry and wet outputs).

Five 1⁄4” flathead 4-40 screws are included with every unit.

Your Signal Chain — Now in Full View

A sturdy, transparent 500-series chassis built for pristine power, flexible routing, and a clear view of your gear.

The Snaqbox™ features a LINK/CASCADE switch. When engaged, the audio output of Channel 1 is internally routed to the input of Channel 2. The link switch disconnects the connection from the XLR input of Channel 2, but does not disconnect the output of Channel 1 (thus allowing dry and wet outputs).

The Snaqbox™ chassis is made of steel and the bottom is affixed with durable rubber bumpers. All XLRs on the Snaqbox™ are Neutrik brand. The unit is powered by an external switching power supply to keep switching noise away from the unit.

Your Modules Deserve to be Seen

 

Available in Clear or Fluorescent Orange acrylic, the Snaqbox™ is designed to showcase your modules — because they’re worth seeing.

SNAQBOX Specifications

Dwonload Specs PDFDownload Manual PDF

Related

  • Accessories, NUVO Parts and Accessories

    NUVO Windscreen

      The NUVO Windscreen is a custom designed foam windscreen that slips over the NUVO N22 and NUVO N8 microphones allowing you to use them up close on vocals without the need of an additional pop filter and outdoors protecting it from direct blasts of wind. It was modeled with a transparent sound so…

  • Accessories, Parts and Accessories, R44 Parts and Accessories

    Posi-Lok

    The AEA Posi-Lok allows you to easily connect your R44 to any heavy duty boom stand, and properly hang the mic. This is especially useful when using your R44 for drum overheads. Ôªø*please note orders typically ship within 7-10 days. we are unable to accommodate rush requests at this time*

  • Accessories, NUVO Parts and Accessories

    NUVO Shockmount

    The NUVO Shock Mount is the standard mic clip included in both the N22 and N8. While it looks like a standard mic clip, it is actually a proper shock mount with vibration rejection due to its elastic band.¬†The NUVO Shock Mount works with both the N22 and N8 as well…

  • Accessories, NUVO Parts and Accessories

    NUVO Bag

    The NUVO bag is the standard velvet slipcover that comes with the N22 and N8. When storing your microphones on a stand, easily place the slipcover over your NUVO microphones and it will protect your ribbons from tramp iron and sudden and spontaneous blasts of wind.

  • Accessories, R88 and R84 Parts and Accessories

    Swivel Mount

    The AEA Swivel Mount is the standard swivel mount that comes with the purchase of an R88mk2 microphone. The swivel mount allows you to angle your mic in almost any direction giving you move flexibility when trying to get your mic in the right spot and especially hanging it. The swivel mount…

  • Accessories

    AD-1 Adapter

    The AD1 allows fits at the base of an RCA or AEA R44 and KU4 allowing you to connect it to a stand. It has an RCA 1/2″M pipe thread to US 5/8″-27F mic stand adapter.